Residential Electrician Near You for Arnold Homes
Our focus has always been on homeowners, which is why we’re proud to be the go-to residential electrician near you in Arnold, MD. From installing new lighting to handling major rewiring jobs, we bring the right mix of skill, safety, and customer care.
Attic Fans to Improve Heating & Cooling Efficiency
An attic fan helps move hot air out of your attic, lowering indoor temperatures and reducing cooling costs during warm months. It can also reduce moisture and help prevent mold. We offer new installations and attic fan repair near you in Arnold, MD, and we’ll make sure everything is properly wired and vented to meet code.
Install or Repair Bathroom Exhaust Fans
Proper ventilation helps remove humidity, reduce odors, and protect finishes. We’ll size the right fan for your bathroom, replace outdated units, install new ducting where needed, and ensure safe, code-compliant wiring so your fan runs quietly and efficiently.
Electrical Services We Provide in Arnold, MD
Our team handles a wide range of residential electrical work for homeowners in Arnold. Whether you need a small repair or a major installation, we bring the same level of care, safety, and professionalism to every job. Some of the most common services we provide include:
- Installing new lighting fixtures and upgrading outdated wiring
- Replacing or upgrading electrical panels and circuit breakers
- Running dedicated circuits for appliances, home offices, or workshops
- Adding outlets and switches to improve convenience and functionality
- Installing and repairing ceiling fans, attic fans, and bathroom exhaust fans
- Providing electrical inspections and troubleshooting power loss issues
Whatever your electrical needs may be, our licensed electricians in Arnold, MD are ready to help keep your home safe and efficient.
Local Resource for Arnold Residents
If your home project requires permits, you may need to visit the county office:
Anne Arundel County Permit Center2664 Riva Road, Annapolis, MD 21401
We’ll make sure your electrical work meets local codes, so the permitting process is simple and stress-free.
Serving Arnold and Anne Arundel County
We’re proud to serve Arnold and the surrounding areas of Anne Arundel County. If you’ve been searching for a licensed electrician near you or a residential electrician near you, Haas & Sons has you covered.
Schedule Your Service With Haas & Sons
Don’t wait until a small issue becomes a big problem. If part of your house has lost power, you need new lighting installed, or you want peace of mind with a wiring upgrade, our team is ready to help.
Call us now at: (443) 396-2555 and see why your neighbors rely on us to deliver local electrical services at great value for a fair price in Arnold, MD below.
Call Haas & Sons today to schedule your electrical service in Arnold, MD.
Recent Jobs and Reviews in Arnold, MD
Arnold, MD at a glance
Haas & Sons Electric Inc. has completed 25 jobs in Arnold, MD between April 2021 and January 2022.
The most recent job was on January 4, 2022.
Haas & Sons Electric Inc. has completed 44 jobs in Arnold, MD in the last 12 months. The first job there was in May 2019.
Job Locations and Reviews
Install whole home surge protector and replace bad gfci breaker. We have replaced an existing 15A gfci breaker. In addition we have installed a new whole home surge protector.
We have determined that the GFCI was operating normally. Bad lighting cord caused GFCI to trip. While on site we swapped a customer supplied switch in the dining area.
This estimate includes the repair of the damaged box, relocation of the transformer, and repair to the ungrounded receptacle. We have Repaired the front door switch box, relocated the transformer, corrected the 3way switching, repaired the ungrounded receptacle. In addition we have corrected the panel double tapped neutral wires and have installed wiring from above and below the panel into proper knockouts with connectors. We shall send estimates regarding the additional work tomorrow morning.
We have determined that the microwave be looked at by a qualified appliance tech or the unit should be replaced. Panel type Square D Homeline.
Replaced outlet in master bedroom next to the bed. We installed a new tamper resistant outlet in place of the old one and installed a new white metal princess plate.
Remove and replace post head using a customer supplied light fixture. Verified proper operation of all completed work with customer.
Remove bulbs and ballast from 4 fixtures and rewire fixtures and install new 120v LED bulbs. Also replaced a customer provided light alongside of driveway. Verified proper operation of all completed work with customer.
This estimate includes the removal and replacement of 2 customer supplied ceiling fixtures. In addition we shall remove an additional light fixture in kitchen area and blank the junction off. We have installed the 2 customer supplied light fixtures. Locations in stairwell and dining room.
This estimate includes the removal and replacement of 2 bedroom ceiling fans. Customer to supply fans. This estimate includes the removal and replacement of 2 50cfm bath fan motors on the second floor. This estimate includes the installation of a proper light box to support the existing vanity in the master bath room. We have determined that the stove whip was never secured properly. This resulted in arcing, electrocution hazard, and damage to the wall from excessive heat. We recommend replacing the damaged unit. Lastly we shall return on the 19th to complete scheduled work. We have collected the 30% down. We have completed all scheduled work.
Installed a new Haas and sons supplied dimmer to control the recessed lights in front of the basement stairs and install customer supplied dimmer to control recessed lights in living area. Both dimmers are in the same switch box.
Replacing the original 3 globe vanity light in the powder room with a new customer supplied LED surface mounted vanity light. Originally the original light was constantly flickering so customer purchased a new light. We found issues in the socket of the far right light. New light is now working properly with no flickering at all.
Re device home and front garage with tamper resistant receptacles. Removed all switches and replaced them. Replaced all outlets with GFCIs in areas the code required them to be Installed weather resistant gfcis outside and in use bubble covers Ran a dedicated circuit for computer area. 20 amp on a arc fault breaker Ran a dedicated circuit for for 2 floor receptacles on a 15 amp breaker Repaired lighting in basement by running new jumpers to the lights and replacing some keyless fixtures Labeled panel 18 month warranty
One of the small appliance circuits in kitchen had no power after lightning struck close to the home the previous week. A surge came into the circuit and faulted the gfci to left of sink which caused the circuit to lose power. Replaced the gfci and restored power to the rest of the receptacles. Strongly recommend installing surge protection in all of the panels(400 amp homeline service with a ATS panel with breakers in it.)
Removed and replaced 2 light fixtures in the basement 30 day warranty
Customer was having an issue with the basement rec room recessed lights circuit breaker tripping. I found that the breaker was a combination Arc fault breaker. We tried testing breaker multiple times and it would not trip at all. After the customer and i tried again we were able to get it to test trip. We determined there was definitely an internal issue with this breaker so we removed it and installed a new one in its place. The basement lights are working properly now and were not tripping off while we were there.
Installed a whole home surge protector in main house panel. Also checked two circuits in home that had tripped the breaker during a storm/lightning strike. No problems were found in either circuit and both were load tested with a window ac and vacuum.
Customer had a voltage surge run through their home and damage multiple surge strips and blow out their whole house surge protector. I also damaged the kitchen sink light as well as the breaker that controlled the basement bedroom circuit. We installed new ultra sure protector in the main breaker panel as well as the Generator panel below it. We replaced the 15 amp QO breaker for the basement bedroom and installed new customer supplied surface mounted light in the kitchen. We checked out the circuits once repaired and everything was back up and working properly.
We have installed 4 customer supplied ceiling fans. 3 upstairs and one in the living room.
Removed and replaced customer supplied universal fan remote
Installed a new 60 amp circuit in basement for furnace. Verified proper operation of completed work with HVAC installers.
Removed existing gable attic fan and replaced it with company supplied gable attic fan I also installed a emergency cut off switch for it 30 day warranty
Removed and replaced ceiling fan in master bedroom. Installed company supplied universal remote kit
Install a customer provide Tesla wall charger in the garage including installing a new 50 amp circuit from panel to garage. Install a receptacle and brush plate for high tv In living room. Installed a new circuit from panel to garage using 6/3 awg romex wire. Circuit is on a 50 amp breaker and goes to a disconnect in the garage then from there to a customer provided Tesla wall charger. Mounted charger on wall and verified proper operation using customers car. Also installed 2 new receptacles in living room for a future hung tv and 2 brush plates with string to pull low voltage wires behind wall.
A customer was trying to remove the Globe of a fixture and the fixture itself came down. I respliced the wires in the box and then re installed the light fixture in the kitchen Also I went to the store and bought a light fixture and removed and replaced a light in the hallway when you first walk into the home
We have removed the existing microwave that was hardwired and have installed a new receptacle for use of new microwave.
