We offer all services in Odenton, but you may be particularly interested in the options below:
Electric Vehicle Charging Station
In the next decade, it’s likely there will be more electric cars on the road than gas-powered ones. That means more and more homeowners are going to consider an at-home electric vehicle charging station a must-have accessory. Get ahead of the neighborhood by installing yours today. Our local electricians near you in Odenton, MD can evaluate your existing electrical system, recommend upgrades if needed, and install your Level 2 electric vehicle charger in Odenton, MD, which can work with Tesla, Honda, Chevy, and other makes and models. We also offer our services for commercial and industrial jobs.
Diagnosing Power Loss by Expert Electrical Contractors in Odenton, MD
When we are called in to diagnose the loss of power to your home, whether it’s the entire house, half of the house lost power, or just a few outlets and fixtures, we typically take a few steps to identify the problem. We’ll check the circuit breaker to see if it has tripped. If it has, we’ll reset it and see if power is restored. If it keeps tripping, that indicates an overload or short circuit on the circuit. We can also check for fuses in older homes and help you obtain a permit for major work. If the circuit breaker is working correctly, we may inspect all the outlets and switches in an area without power to look for any signs of damage or loose connections. We’ll also check for tripped GFCI outlets. To check these outlets and switches, we’ll use a voltage tester, or a multimeter which we calibrate regularly, to see if there is power present at each outlet or switch. This can help determine if the problem is just one outlet, or in multiple outlets. If our electricians suspect a wiring issue, we’ll inspect the wires in the powerless area to determine if there’s damage, a fixture that’s faulty, or loose connections causing a short, or burn damage to the wires. We may also use a wire tracer to locate any breaks in the wiring. We use tools like pliers and wire strippers to get the job done right. We can troubleshoot and test your main circuit breaker box to see if there are any issues with the breakers or wiring, and make sure everything is properly grounded. We also handle generators and transformers. We splice and terminate all wires with precision.
Installing Dedicated Circuits near Odenton, MD
There are a few reasons why you might want a dedicated circuit in your home. Firstly, it can help prevent overloading of the electrical system, which is a potential fire hazard. It can also reduce the risk of electrical shock by making sure that only one appliance is connected to the circuit. Another benefit of having a dedicated circuit is that it can provide consistent power to an appliance, even if other appliances are being used at the same time. This is especially helpful for high-power appliances like air conditioners, refrigerators, hot tubs, saunas, pools, or electric water heaters. Our services are specialized to connect all your appliances, and we also maintain your system to ensure everything is in proper working order. Our affordable prices make it easy to get the work you need done. We will also mount all new fixtures and fans.
Licensed Odenton Circuit Panel Upgrades
We can help perform what is called a “Heavy Up” or an upgrade to a 200 amp circuit panel. This is most often done in older homes or when an appliance is added that puts a strain on your circuit panel and breakers. The classic symptom that may be an indicator that you need an upgrade is frequently tripping breakers.
Install or Repair Bathroom Fans
Installing or replacing a bathroom exhaust fan is a simple yet essential task that can significantly improve the air quality in your home.
The first step is to choose the appropriate size and type of fan based on the bathroom’s dimensions and ventilation needs. Once we have your new fan, we’ll need to turn off the power to the existing fan, remove it from the ceiling or wall, and disconnect the wiring. The new fan can then be installed, with the ductwork properly attached and secured, and the wiring reconnected. Finally, turn the power back on, and we’re all set to enjoy improved ventilation and a fresher bathroom environment.
Ceiling Fan Installation or Replacement
An electrician to replace or install a ceiling fan in your living room or bedroom will ensure that the fan is safely and properly installed, following all necessary building codes and safety guidelines required near Odenton, MD. They can also provide advice on the appropriate fan size and type for your space and help with any necessary electrical upgrades. Hiring a professional can save you time, effort, and frustration, and ensure that your fan is installed correctly, avoiding potential safety hazards or costly mistakes. Additionally, many electricians offer guarantees or warranties for their work, giving you added peace of mind.
Adding an Outlet
Older homes are notorious for not having enough outlets in a room. Newer construction is generally built with plenty of opportunities for outlets that serve lamps, appliances, etc.. If you’d like an outlet added or moved near Odenton, our team can help! Give us a call today to schedule an appointment.
Attic Fans to Improve Heating & Cooling Efficiency
Outdoor Lighting
Jazz up your outdoor space and increase security with an outdoor lighting plan executed by our highly rated team of electricians near Odenton. From landscape & patio lighting to motion detection lights and electrical wiring for you cameras and security system – our team does it all.
Odenton Local Electrical Inspections Near You
If you’re looking at purchasing a property in or around the Odenton, MD area – we perform electrical home inspections for purchasers and sellers all the time. This is an in-depth look at the electrical systems of a property with the professional eye of a licensed electrician. Home inspectors are trained to spot blatant issues, but they can miss a lot. A separate electrical home inspection can make a big difference during your sales/purchase process.
The Top-Rated Odenton, MD Electrical Contractors Near You
Call us now at: (443) 396-2555 and see why your neighbors rely on us to deliver local electrical services at great value for a fair price in Odenton, MD below.
Recent Jobs and Reviews in Odenton, MD
Odenton, MD at a glance
Haas & Sons Electric Inc. has completed 25 jobs in Odenton, MD between December 2023 and May 2024.
The most recent job was on May 29, 2024.
Haas & Sons Electric Inc. has completed 48 jobs in Odenton, MD in the last 12 months. The first job there was in May 2019.
Job Locations and Reviews
Replace current lighting fixture above dining room table. Light will be replaced with chandelier and current box installed is a fan/fixture box.
We have delivered pricing regarding the dedicated 240V 50A circuit for new range. This solution includes the installation of a 240V 50A circuit to terminate into a receptacle. We have installed the new range circuit and receptacle.
Today’s visit was for attic fan replacement. While doing my assessment, I also saw there was no receptacle in the attic and multi wire branch circuits on single pole breakers. Please below for work performed: Replace customer supplied attic fan Install receptacle in attic for servicing purposes Install two pole breakers for multi branch circuits Good luck on your move to Myrtle Beach!
We will run a new dedicated 20 a.m. circuit along the sidewall from the main panel over to the treadmill location. We went I need dedicated receptacle in which we will pipe down the concrete wall behind the insulation.
Today’s visit was for ceiling fan install. Box needed replacing as it was hanging out of the wall and of course installing the ceiling fan. Below work performed: Replace ceiling fan and brace box
Installation of new ceiling fan fixtures located in each of the four bedrooms on the second floor. Installation of a ceiling fan for a 4 seasons porch located on the rear of home. Installation of a new LED customer supplied dimmer for the can lights in the living room. Customer had one ceiling fan that was broken in box, could not install. Will return for a follow up visit when he receives it at no charge.
Today’s visit was for EV charger install. Customer would also like ceiling fans and vanity light replaced as well. Please see options for all the above as well as an option with surge protection
Today’s visit was for light replacement and breaker not resetting. During assessment I saw panel was a Westinghouse from 1992. It was the breaker that would not reset. I recommend replacing the panel soon. This will continue to happen. Please see solution to get that resolved for you. Work performed today: Replace (2) 15 amp breakers Replace (1) 4’ vanity light Replace (2) customer supplied toggle switches
Was called out for ceiling fan flickering. Turns out the ceiling fan was going bad and would no longer work with dimmer. To get ceiling fan wiring, I replace fan switch with two single pole switches. I recommend replacing the ceiling fan at your earliest convenience. See estimate to replace smoke detectors throughout home.
Provided an estimate to replace a chandelier on a 20 foot ceiling and to install a dimmer in place place of a standard three-way switch.
We have determined that there is power at the ring doorbell. Chime working.
Customer originally called us out to check out a broken pull chain keyless light fixture in laundry room. When i examined the issue the customer decided it was best for me to run a 14-3 wire from the light junction box in the ceiling and run that to the outside wall of the room so i could install a single pole light switch inside an old work single gang box. I then supported my wires in the ceiling i then installed a new switch controlled keyless light fixture that we supplied. On my safety evaluation i noticed that the customer had multiple double tapped neutrals inside the panel and they were missing a whole home surge protector. I removed all the double tapped neutrals also the grounds that were incorrectly installed under the screws. The national electrical code required neutrals to be under their own separate screw and grounds may have 2 under the same screw but must be same size. So i made it so the neutral bar is up to code. Also the range circuit neutrals were separated
For this job i met with the customer for quote on installation of new exhaust fan. Fan is located currently inside of master bath toilet area where customer is having issues with bathroom venting out steam while showering. New location that was discussed will be right outside the shower area to assist in removal of excessive steam.
Insulation of 6 foot hydronic baseboard heater in the basement main area. Installation of thermostat on opposite wall as well as option to install rheostat control on unit.
This solution includes the installation of 2 customer supplied light fixtures to replace the existing top floor hall lights. In addition we shall remove the existing doorbell and replace with a new customer supplied Ring doorbell camera and lower rear exterior fixture to be replaced with new Ring floodlight. Lastly we shall install new TV mount and television in the living room. Receptacle, not working in living room to be replaced too.
The original call was to estimate the cost of installing 2 customer-supplied ring devices. The first a doorbell camera to replace the existing button. The second was a ring flood light to replace the existing rear exterior light. In addition, we were to remove and replace two light fixtures in the top floor hall with new customer-supplied lights. Lastly, we were to install a TV mount and television in the living room. During the assessment, I noted the lack of surge protection, common trip handle breakers, and double-tapped neutrals. Lastly no bonding at water heater was present. We have delivered pricing regarding various tasks. No work performed today.
Replace current transformer to door bell due to transformer no longer properly working. Re-wire doorbell from the chime box and at the video doorbell for proper installation.
We will remove and replace outside light fixture with a customer supplied light fixture and install a new longer siding block to protect the longer light fixture from potential weather damage We will install a fan light speed control switch for fan in living room We will remove and replace a lamp post photocell for the lamp post in front yard VIP membership We came out here because customer was having flickering light issues the customer had non-dimmable lightbulbs in the light fixtures so when we come out to do the work we will also change to light fixtures lightbulbs with customer supplied dimmable LED lightbulbs The living room space heater fireplace is also hooked to the kitchen countertop receptacle with the coffee maker so when the coffee maker is on and the fireplace is on it’s drying too much energy tripping the breaker my recommendation is to move the coffee maker on the other side of the kitchen countertop where the receptacles are on different circuits 12/26 We return
This solution includes the installation of 4 customer supplied under cabinet lights. In addition we shall we shall remove and replace 2 existing fluorescent fixtures with new customer supplied lighting, located in master bedroom closet and the basement closet. This also includes bonding at the water heater. Lastly this includes updated carbon monoxide detectors in the home. Customer to schedule when lighting arrives. We have taken deposit of $315. Membership acquired. We have installed the new under cabinet lights in the kitchen, installed 3 new carbon monoxide/ smoke detectors, replaced the 2 closet fixtures (basement and 2nd floor) and bonded the water heater.
Provided solutions to remedy burnt outlets in the basement, as well as to install permanent heating source in the basement with a thermostat attached the unit.
The original call was to check power loss to a dishwasher and a receptacle located at the kitchen island. During the initial troubleshooting phase, I noted the dishwasher plugged into a gfci near garbage disposal. There were no gfci receptacles in kitchen, but protected by a gfci breaker. I noted 2 other receptacles without power. The breaker must’ve been tripped. Approaching the CH BR 200A type panel, i noted no surge protection. During the assessment portion, I noted the lack of surge and potentially damaged GFCI receptacles in the home. The customer chose the upgrade solution, which included 5 new GFCI receptacles, a new combo breaker for the kitchen appliance circuit, and the premium surge protector. We installed new GFCI receptacles at the sump pump, panel, first-floor bathroom, and 2 GFCIs under the kitchen sink. We replaced the older combo breaker for the kitchen appliance circuit and, lastly, installed a premium surge protector at the panel. The customer declined the me
I removed all devices on Home GFCI circuit then I installed a tamper resistant GFCI that was underneath the electrical panel there has to be a GFCI there due to the fact that there’s a concrete floor and an unfinished area everything outside I installed temper resistant weather resistant GFCI’s with new in use bubble covers when I opened up all the junction boxes I spliced all the appropriate wires together than pigtail off the splice took the single wire and landed it on the line side of the GFCI this is to ensure the best and safest possible connection throughout the electrical circuit I also line sided all the GFCI’s so that if a GFCI trips in one area on the circuit it will not affect the rest of the circuit it will send power to the rest of the GFCI’s outside and underneath the electrical panel I remove the existing GFCI breaker so that way there was not a nuisance trip and I installed a standard single pole 15 amp BR breaker Customer is also now a VIP member
The reason for today’s visit was customer had a single pole light switch in master bath room that did not work. While doing my performance and safety assessment, I noticed multiple points of concern. The panel was a 2002 Homeline QO MLO with double tapped neutrals. I walked throughout home with customer and pointed out things that I saw. The home had devices that were very loose and the springs were worn in the receptacles to the point that plugs were falling out. While doing P.S.A I also saw outdated Carbon/smoke combo in the center of the living room. Customer did not have any smoke detectors in bedrooms. While plug checking, I saw one of the GFCI’s on the kitchen island had a broken face on the device. I also noticed that the washer did not have any GFCI protection as per NEC code. Customer declined any work at this time and only approved discounted service charge.
We have provided pricing for the ceiling fan installation.
This solution includes the installation of a quad receptacle above the fireplace for tv power. In addition we shall shall install the customer supplied HDMI cord using low voltage rings. This solution also includes the relocation of a plug that has been covered up by a cabinet in the kitchen area. In addition. Lastly we shall install a receptacle for the fridge in the garage. Power shall be pulled from the garage door receptacle. We shall return the next Monday to complete the installations. We have returned to install the receptacle in the garage. In addition we have relocated the receptacle that was hidden behind the cabinet to above the counter top.
