Lothian MD Electrician Services

Reason for today’s visit was to look at installing a new 50 amp circuit for a hot tub being installed in the backyard. Customer stated he is having a company install a paver patio and the tub is going roughly in the center of it. The new circuit can be stubbed out of the main panel in the garage and pipe down the side of the Home in the driveway with the spa pack installed in the back corner. Who don’t have to trench roughly 18 foot and install PVC underground Underground from the spa pack to the front corner of where the hot tub will be placed. We will then have to do a return trip after the hot tub is set to wire the new tub and to test it out. underground from the spa pack to the front corner of where the hot tub will be placed. We will then have to do a return trip after the hot tub is set to wire the new tub and to test it out. Home was just completely rewired at the end of last year however it was inspected from the odor code cycle so it is missing surge protection. We will also

For todays visit with the customer i was called out for installation of surge protection on ATS system and surge protectors on the Main Panel of the home. Customer has two main panels, one being a 150 amp BR and the other a 200 amp BR. Both installed around 2000’s. Went over the customers needs with surge protection due to a generator taking a hit last storm and frying the circuit boards. At this time i went over the options to install all four, he would like to take time to speak with his wife on the decision and get back to us.

We are replacing all switches and outlets in the home. We are installing a dishwasher plug underneath the sink. We are moving the dryer plug up the wall and cutting in a flush mount plug. 2/28 We returned today and completed re-device of home. We install GFCI‘s and all the basement receptacles as well as resecured one of the boards holding a receptacle for the sump pump. One last visit we installed all new devices on the first floor as well as relocated the dryer plug higher on the wall and cut in a flush mount receptacle. We also added underneath the kitchen sink for a dishwasher to plug into. Once completed we added a new panel schedule and labeled all the breakers accurately. All lights and receptacles are working properly.