How Do I Know That I Need A New Electrical Panel?
Frequently news reports on catastrophic fires give electrical wiring problems as the cause. The National Fire Protection Agency estimates that electrical problems caused 144,000 house fires over a four-year period. Of course, you don’t want that to happen to your home. Some of the warning signals might be dimming lights, discolored power outlets, burning odor, or minor electric shocks. If the electrical system in your home is still using fuses, it’s time to move up to circuit breakers. Fuses are outdated and may pose a safety hazard.
What Is The Cost To Upgrade An Electrical Panel in Maryland?
Replacing a 100 amp electrical panel normally runs $3000-$4000, while a 200 amp runs $4000-$5000. The cost to upgrade an electrical panel in Maryland to 200 amps can be an investment of $6,000 to start, while we have had some clients invest upwards of $10,000 for the top of the line and all the add-ons. This is due to all the parts of the electrical system that will need to be installed to meet the code requirements for the 200 amps. The add-ons most of our clients spring for are generator hookups, whole-home surge protection, a better quality electrical panel, and installation of AFCI (arc fault circuit interrupter) breakers to make the home safer.
When Should I Replace my Electrical Panel?
You should consider replacing your electrical panel if:
- It’s over 30 years old
- You’re adding large appliances
- You have a panel that isn’t safe
- It’s showing signs of rust/corrosion
Electrical safety standards are constantly being updated to provide safe, clean, and efficient power to your home. As the electrical system ages, parts can deteriorate not only in performance, but in physical condition. We have seen circuit breakers not trip when they are supposed to, while others may trip frequently. A good time to consider replacing your panel is if you plan on adding on to your home, or need more power for a larger appliance. The most common items that can trigger this are electrical vehicle charges, computer servers, hot tubs, electric heat pumps, tankless water heaters, and electric stoves. Maybe you want to finish your basement and turn it into an apartment or in-suite. These typically will increase your power needs.
When to Update Your Circuit Panel or Get an Electrical Panel Replacement
The first step in analyzing your circuit panel's health is to call a professional, such as Haas and Sons, so we can perform an inspection to determine if it’s due for updating. An inspection of your Maryland home will allow us to identify problem areas in your circuit panel, which will tell us if you need small improvements or a full remodel.
Other occurrences that often require a circuit panel upgrade or electrical panel replacement include:
- When you are selling your home
- When you are remodeling or adding rooms
- If your power is constantly flickering
If you relate to any of these circumstances, call our professionals today for quality inspections in a timely manner and affordable cost.
Can I Replace my Own Electrical Panel?
We do not recommend replacing your own panel. Bluntly speaking, electricity is dangerous and poses a serious life-threatening hazard. You could hurt yourself as you work on your panel, or hurt a family member if something is hooked up incorrectly.
We strongly suggest hiring a professional electrician. A quality electrician would be trained to ensure the job is done right and that the project results in a safer home for you and your family. Even hiring an unlicensed handyman can be dangerous. Plumbing and electrical projects are not things that should be left in the hands of someone unskilled or uncertified.
Heavy-Up Electrical Panel Upgrade
One option for upgrading your circuit panel is to call our team of professionals to perform an electrical heavy-up. What this means is that we will enhance your circuit panel to 200 amps, which will allow for greater electrical output.
Heavy-ups are common among customers who are having hot tubs, heat pumps, and home additions installed. Essentially, any home addition that requires a significant amount of power is enough reason to consider an electrical heavy-up. You might need this if you run a business from your Maryland home as well.
Let Our Certified Electricians Help You Decide
The first thing on the list for a certified electrical technician would be to examine the current system. Technicians frequently provide a free initial inspection. In many older homes, our electrician will find an older panel providing 60 amps of power, or perhaps a standard breaker-type panel at 100 amps. Today, 200-amp panels are recommended. These panels allow for future upgrades and are better when you resell the house.
Water Damage: A Sure Sign Of Trouble
If there has been a water leak anywhere near your panel, call a professional immediately. Leaks can be dangerous and need to be fixed right away. A less obvious sign of a water problem is when you see rust stains on the panel cover or a chalky white corrosion on wiring and other metal parts.
Give Your Electrical Box A Regular Check Up
You’ve heard “If it ain’t broke, don’t fix it.” How about a new phrase?: “If it ain’t broke, still check it.” The Federal Pacific Stab-Lok, Zinzco, and Challenger B series all have had their safety rating revoked and responsible for approximately 2000 house fires per year. These were installed from the 1960s through the 1990s. If you’re not sure what you have and want us to check, please call us and we will help verify what brand you have. With an estimated 28 million of these panels still in use, you may have one.
Inferior brands that don't hold up well over time are GE, Bryant, Murry, Westinghouse, Bulldog / ITE Pushmatic, and Wadsworth. Wadsworth and the ITE Pushmatic have been out of business since the 1980s and incredibly hard to get parts for. Some might say, “I’ve lived in this house for years and haven’t had a problem.” If you find yourself in this situation, you’re a fortunate person. One of the main purposes of a circuit breaker is to shut down a line when it is overloaded and prevent a fire. Too often, Stab-Lok breakers fail to shut down the circuit. A visual test will not determine if you have a problem. Once again, this task is best carried out by a certified technician. The Stab-Lok panels and circuit breakers are labeled. If you see this on your panel, have it checked out.
What are Good Panels to Buy?
The two best panels currently are the Square D QO series and the Cutler-Hammer CH series. Siemens also makes a decent panel but is used much less across the industry. Leviton has recently released a new type of panel that has Wi-Fi capabilities among other really neat features. Both Cutler-Hammer (BR series) and Square D (Homeline) make a residential series which we do not recommend, because of the inferior quality and materials used. The industry leaders being the QO and Ch series both utilized solid copper bus bars (the parts that breakers connect to and flow electricity) which are often plated to protect the copper from corroding over time.
Getting A New Panel
Think about all the electronics in your home. From the flat-screen TV, to kids’ games, to sensitive financial and work-related data stored on your computers. Do you want to risk losing that to an aging, or malfunctioning breaker box? Probably not. Of course, any new installations must conform to the local electrical code. Your Maryland-certified electrician will make sure you are equipped with an electrical panel that will have you worry free for years to come. An electrical inspection may not be required when you are rehabbing a kitchen or converting your basement into more living space. Still, an inspection of the electrical panel makes sense. Find out about potential problems before they become a nightmare.
Contact An Electrical Panel Upgrade Professional Near You!
If you have a panel over 25 years old, you should look into getting a replacement. You should also consider replacing your panel if you’re experiencing problems with yours, have an FPE, Zinzo, or Challenger B series.
It doesn't hurt to have a professional out to evaluate your electrical system to see what options you have to not only make your home safe but ready for those future projects. Square D QO and Cutler-Hammer CH are the best and longest-standing models on the market that you want in your home. We would be more than happy to help you evaluate your electrical system and give an electrical panel upgrade price. Call us today!
Call a local electrician near you today at 443-396-2555 for heavy-up estimates, appointments, and more!
What A Happy Client Says About The Cost to Upgrade Electrical Panel in Maryland by Haas and Sons on Google
"From the start Haas & Son was extremely responsive, courteous, professional, and just simply put, nice! Matt was extremely knowledgeable and clearly good at what he does. Matt Changed 240v breakers to 120v for microwave. Also fixed some issue in the panel. He Installed an outlet for the microwave. Everything thing about this appointment was a good experience."
Dan W
⭐⭐⭐⭐⭐
