Electrician Glen Burnie: Reliable Local Electrician Services Near You

Today’s visit was for washer/dryer receptacle, intermittently, tripping. Appliances are gas and also share the circuit with a sump pump. I recommended running a dedicated circuit for the washer and dryer. They should both be on their own circuit. Customer said that they are going to look at getting the sump pump checked out before making any decisions and will reach back out to us. I did see that the membership was up for renewal and the customer agreed to add another year. See below for invoice of today. Add another year membership

This solution includes the wiring repair to the basement circuit. We have repaired the damaged wire in the basement that was cut during the French drain installation.

Reason for todays visit with the customer was a failing light switch inside the basement and kitchen. Upon examination we noticed poor slices and back stabbed devices. We recommended a full Redevice to remedy this as the customer is moving out of her home soon to rent it. We also noticed missing smoke detectors inside the home. We recommended to replace all of them at once and remedy this problem. The customer agreed to the full Redevice and detector replacement. Today we replaced four 3way switches, three carbon detectors, and two smoke detectors in the bedrooms. We will be returning on a future date to complete the Redevice. Customer will reach out when ready to complete the rest of the work. 1600.00 Deposit collected. 6/17 We returned today and completed all quoted Work. We replaced all remaining devices inside the home, which includes all switches, receptacles, as well as the GFCI’s in the kitchen and the second-floor bathroom. We install new weather resistant receptacles with ne

Arrived onsite and the resident showed us to the dining room where he had a switch taken apart that was mostly burnt up wires, all aluminum. He told me he found it that way and turned power off immediately. After investigating he has a lot of aluminum wiring throughout the home that i talked to the residents about, informed and educated as to what keeping that will do, and what’s solutions we can provide. After that talk i wrote up a price for a redevice and whole home alumicon job because the circuits are very overloaded and aluminum in most the house. We also talked about our vip membership which he purchased along with the fix for today, which was to take all the wires apart, tape them all up, alumicon all the connections and install a new single pole switch. Now the light connected to that switch works again after our repair.

Arrived onsite and talked to the resident about the ceiling fan they wanted to add in the hallway bathroom, we had talked about two outside coach lights one on the back of the house and one on the front of the house as well. She also mentioned her outlets throughout the home are loose in some spots so i discussed a redevice job with her. For today she chose option 1 which was to have a fan added in the hallway bedroom, and the single gang changed to a 3 gang so she has switch controlled outlet, fan light, and then fan in that order for the 3 gang. We hung the fan light side down per request while i tied in the gang box, and then we cleaned up all the plastic we laid to protect the ground. After the fan was hung we restored power to that circuit and tested all the switches a the new fan, and allow were verified working. I also talked to the resident about out vip membership plan when we were discussing options and she ended up signing up for that as well.