Electrician Glen Burnie: Reliable Local Electrician Services Near You

Haas & Sons provides electrical services that include electrical repair and installations for Glen Burnie, MD residents —from lighting fixtures to ceiling fan installation to breaker box replacement and surge protection near you. Our experienced and professional electricians are licensed, certified, qualified, and skilled. We are a reliable company, fully insured and bonded, that provides affordable and available services to both residential and commercial properties. We also offer emergency services.

Electrician Services in Glen Burnie

We specialize in electrical panel upgrades to ensure your electrical system can handle modern power needs. We will inspect your current setup and diagnose any issues to troubleshoot the problem. We upgrade outdated electrical panels and circuits, and can add new outlets and switches. We adhere to all electrical code standards.

Our journeymen and master electricians are also trained to install and maintain new fixtures and appliances. We use professional tools like multimeters, voltage testers, wire strippers, and pliers to measure and test all connections. We ensure every wire is properly grounded, and we splice and terminate connections within a safe junction box or conduit.

For larger projects, such as installing generators, transformers, or new lighting, we will provide a free estimate and help you obtain the necessary permit. We also offer specialized services for electric vehicle chargers and can mount the station in your garage. Our team works hard to connect your home with the safest wiring possible.

Lighting Installation And Replacement

From under-cabinet lighting to recessed fixtures, we install all types of indoor and outdoor lighting to improve both the function and look of your home. If your current lights are flickering or outdated, we can safely replace them with energy-efficient options that last.

Ceiling Fan Installation by a Local Electrician Near You

Ceiling fans can help keep your rooms comfortable year-round while reducing energy costs. We’ll install your new fan—whether it's replacing an old one or adding a new fixture—and ensure proper wiring, balance, and operation. We also specialize in attic fan repair to help improve ventilation and extend the life of your cooling systems.

Electrical Panel Upgrades

Older homes in Glen Burnie, Maryland often need electrical panel upgrades to handle modern power needs. If you’re adding new appliances, remodeling, or experiencing frequent breaker trips, we’ll upgrade your panel to keep everything running safely and efficiently.

EV Charging Station Installation Near You

Own an electric vehicle? We can install a fast, reliable Level 2 home charging station in your garage or driveway. Our team will evaluate your home’s electrical capacity and set up a dedicated circuit for safe, consistent charging. Looking for an electrician near me to install an EV charger? We’re proud to serve Glen Burnie and nearby communities.

Local Licensing, Permits & Electrical Code Requirements in Glen Burnie, MD

Local Licensing & Registration Requirements

How do electrician licensing or registration requirements differ in Glen Burnie compared to other cities in Maryland?
Glen Burnie is located within Anne Arundel County and does not have any special license requirements.

How can homeowners in Glen Burnie verify that an electrician is properly licensed and authorized for their specific location?
All Maryland electrical contractors are required to have an active masters electrical license. You can look them up here:
https://www.dllr.state.md.us/cgi-bin/ElectronicLicensing/OP_search/OP_search.cgi?calling_app=ME::ME_qselect
You could also call Anne Arundel County to verify your contractor has an active electrical license with them.

Permit Requirements

How do electrical permit requirements in Glen Burnie differ from other cities or counties in Maryland?
You can get electrical permits for Glen Burnie from the Anne Arundel County Citizens Access website https://aca-prod.accela.com/aaco/Default.aspx. There is nothing special needed for this city.

How do permit requirements in Glen Burnie impact the cost and timeline of residential electrical work?
Glen Burnie, MD does not have special requirements that would impact a project.

Local Code Adoption & Amendments

How is the electrical code enforced differently in Glen Burnie compared to other parts of Maryland?
Glen Burnie is enforced by Anne Arundel County and has no specific code requirements.

How do local code rules in Glen Burnie impact the safety and execution of residential electrical work?
Glen Burnie does not have any special local code rules that differ from the Anne Arundel County requirements.

Home Safety Inspections

If it’s been a while since your electrical system was checked, a safety inspection can prevent potential hazards. We’ll look for outdated wiring, overloaded circuits, and other issues that could lead to shocks or electrical fires. Ideal before selling a home or after moving in.

Troubleshooting And Repairs

From faulty outlets and flickering lights to total power loss, our electricians will quickly find the problem and make the right repair. We come prepared with the tools and parts to fix most issues on the spot, saving you time and hassle.

FAQ For Electricians Near Glen Burnie, MD

What is the average cost to install an electric vehicle charging station in my Glen Burnie, MD home?

The average cost to install an electric vehicle charging station in your Glen Burnie, MD home is $1,000-$3,000. The overall price can vary depending on the following factors:

The level of the charging station you want installed.
If you also need electrical circuits installed.
The contractor’s hourly fees.

For most homeowners, you have the choice between a level 1 or level 2 car charging station. Level 3 vehicle charging stations are specifically designed for commercial use. Commercial properties have the option between a level 1, 2 or 3. To learn more about having a vehicle charging station installed at your home, contact us.

Why would I need an electrical safety inspection for my Glen Burnie, MD home?

A few reasons to get an electrical safety inspection for you Glen Burnie, MD home include:

If your lights flicker or surge.

You notice surges from using large appliances.

An increase in your electrical bill.

Loose outlets or switches.

If you notice any of the issues listed above, you should have an electrician perform an electrical safety inspection of your home to ensure the safety of your home. Call Haas & Sons Electric to have one of our expert electricians inspect your home.

How do you fix a GFCI that won't reset near Glen Burnie, MD?

Here are some ways to manually reset a GFCI that won't reset in Glen Burnie, MD:

Press the test button and then try pressing the reset button again.
If your GFCI tripped because of moisture or water, dry the outlet with a blow dryer and then press reset.
Check your circuit box to see if the connected circuit was tripped, if it has, turn it on and press reset again.
If you have a circuit tester, hold the test button until you get a reading (be careful not to hold it too long, as you can risk overheating the system). If there is an electrical current, press the reset button.

If none of these solutions worked or you were unable to get a reading of an electrical current, your GFCI outlet should be repaired by an electrician. Give us a call today to learn more about our repair services.

How much does it cost to install an electrical box near Glen Burnie, MD?

It costs around $7,000-$11,000 to install an electrical box in Glen Burnie, MD. A few things that may impact the overall cost are:

The type of electrical box you want installed.
The number of circuits you want.
The cost to replace or install wiring.

Another factor that can impact the price is whether you would like the electrical box to be installed indoors or outdoors. Call us today to get an electrical box installed!

Call us now at: (443) 396-2555 and see why your neighbors rely on us to deliver local electrical services at great value for a fair price in Glen Burnie, MD below.

Recent Jobs and Reviews in Glen Burnie, MD

Rated 4.9 out of 5 stars based on 53 customer reviews

Customers say: The overall sentiment expressed across these reviews is overwhelmingly positive, reflecting strong customer satisfaction with the electrical services provided. Customers consistently praise the professionalism, knowledge, and courtesy of the technicians, emphasizing their punctuality, efficiency, and ability to explain technical issues in clear, understandable terms. A recurring theme is the friendly and respectful demeanor of the service providers, with many reviewers highlighting how personable and pleasant the technicians were during their visits. The quality of workmanship receives high marks, with customers expressing confidence in the thoroughness and competence of the repairs and installations completed. Many reviewers specifically mention their intention to use the company again for future electrical needs and enthusiastically recommend the services to others. The responsiveness of the company, including same-day appointments and timely arrivals, is frequently appreciated. Customers value the transparent communication about diagnoses, options, and costs, as well as the care taken to respect their homes during the work. The tone is decidedly positive, with expressions of gratitude, satisfaction, and trust dominating the feedback. While one review mentions pricing being slightly high, this is presented as a minor consideration within an otherwise excellent experience and does not represent a significant trend in the feedback.

Glen Burnie, MD at a glance

Haas & Sons Electric Inc. has completed 5 jobs in Glen Burnie, MD in May 2025.

The most recent job was on May 7, 2025.

Haas & Sons Electric Inc. has completed 81 jobs in Glen Burnie, MD in the last 12 months. The first job there was in May 2019.

Job Locations and Reviews

Nicholas T. Checked in 552 days ago

Replaced customer supplied 50cfm bathroom exhaust fan in the second-floor hall bath. Once installed, we tested fan and it is working properly.

Glen Burnie, MD 21108

josh@haasandsons.com Checked in 552 days ago

-Arrived onsite and we were shown to the kitchen ceiling fan where the pull chain where it was no longer functioning properly, as well as the fan pull chain which was also not functioning properly. We talked about the possibility of replacing the whole fan because that may be cheaper but ultimately after talking, the repair was wanted more. After opening the fan, i found the light pull chain was bad, and the fan one had an issue because the low fan speed was going out. So i went and got new pull chains and we installed them into the existing fan and although she doesn’t have a low speed due to the transformer going bad for that, her high and medium speeds, and the light pull chain now work perfectly fine. I also cleaned the fan of for her while i was up there. After completed , i tested and verified it working.

Glen Burnie, MD 21061

josh@haasandsons.com Checked in 553 days ago

We were called today to look at installing a dedicated circuit for a car charger receptacle. We would take the circuit from the panel into the bulkhead near the panel. We would then take the circuit through the bulkhead into the unfinished area and into the garage. From the garage we would set a 6x6x6 PVC junction box and then run PVC conduit from the junction box to the front of the garage. We would then set a Midwest box with an EV rated NEMA 14-50 receptacle. Our solutions also included the installation of a surge protector, and pricing with and without our VIP Membership. Resident is getting multiple quotes, and requested for us to email over our solutions that we presented today.

Glen Burnie, MD 21060

Genny G. Checked in 554 days ago

Reason for the call was outdoor electrical not working. We determined that the breaker was in the office position inside at the main panel. While on site, we did a full safety assessment and saw that the subpanel outside needed to be replaced. It was all rusted and corroding very badly. There was also a new grounding for the detached building. All of the devices in the shed and outside were very old and corroding as well. Please see below for work performed during today’s visit. Replace sub panel for pool Install ground rods for pool panel Replace all devices on the exterior of the home Replace all switches and receptacles in shed area Also, see attached for solution to replace the panel that desperately needs it.